【功能要求】
1.光缆固定与保护功能:应具有光缆接入,固定和保护装置。该装置将光缆引入并固定在机架上,保护光缆入缆中纤芯不受损伤。光缆金属部分与机器绝缘,固定后的光缆金属护套及加强芯应可靠连接高压防护接地装置。
2.光缆终接功能:应具有光纤终接装置,该装置便于光缆纤芯及尾纤接续操作、施工、安装和维护。能固定和保护接头部位平直而不位移,避免外力影响,保证盘绕光缆纤芯、尾纤不受损伤。
3.调线功能:通过光纤跳线连接器接头。能迅速方便地调度光缆中的纤芯序号及改变光传输系统的路序。
4.光缆纤芯和尾纤的保护功能:光缆开剥后纤芯有保护装置并固定后引入光纤终接装置。
5.容量:每机架容量和单元容量(按适配器数量确定)应在产品企业标准中作出规定,光纤终接装置,尾纤盘线装置,适配器卡座,尾纤及适配器,在满容量范围内应能成套配置。
【安装说明】
1.落地安装时:先在预制的水泥基座上按安装尺寸预留4个M12的地脚螺钉,地脚螺钉凸出基座表面约为150mm,安装时先打开设备门,将设备内底部的两个插销拔出,并打开设备底座面板,将设备放在水泥基座上,用螺母将底座内的地脚螺钉拧紧,合上基座面板,插好插销,锁紧面板。
2.架空安装时:在站台适当位置留出4个φ13孔,根据安装尺寸将设备固定可靠
四网合一光缆交接箱
一般的光缆交接箱均由:箱体、一体化熔接盘、光缆固定板、挂纤柱几部分组成。
1.交接箱具有配线、熔接、储纤、调纤功能,有顽强地抗野外环境的性能,并能抵受剧烈的气候变化和恶劣的工作环境,箱体密封性能良好,防护等级达IP65级要求。
四网合一光缆交接箱(容量:144芯288芯、432芯、576芯、720芯、840芯、960芯、1152芯、1200芯、1440芯)公司主营产品:光缆交接箱,光纤分线箱,光分路器箱,光纤楼道箱,光分路箱,光分路器配线箱,光纤跳线尾纤,光纤快速连接器,光纤耦合器,光纤面板,光缆接头盒,光纤盒,光纤配线箱,光分路器,光纤冷接子,ODF单元箱,阴阳衰减器,光纤热缩管,祼纤保护管,熔纤盘,法兰支架,三叶线环,储纤筒,过线环,绕线环,光缆固定,多媒体信息箱等
1. Characteristics of traditional optical fiber transfer boxes
High strength SMC box structure, weatherability and strong corrosion resistance.
The box door is locked at three points, the door hinge is built, it is effective against theft and destruction.
Tray type termination unit, modular design, convenient for system expansion and installation.
Reliable optical fiber cable introduction and fixed protection device is suitable for non ribbon optical cable and ribbon optical cable.
It is suitable for installation of FC, SC, LC, ST and other adapters.
The full radius of curvature is greater than 37.5mm.
Two, outdoor optical cable transfer box product description
GXF05 series optical cable junction box is an interface device used at the junction of main optical cable and distribution optical cable in optical transmission network. It is used to realize the fixed and protection of optical cable, the fusion end of optical cable, the protection of optical fiber junction point, the distribution and dispatch of optical fiber line, the protection of internal equipment and the installation of other value-added